TT Roadster L4-2.0L Turbo (BPY) (2008)
-
Remove right drive axle from transmission flange shaft
-
Disconnect electrical connector - 1 - on Oil Level Thermal Sensor (G266).
-
Unclip bracket - 2 - for electrical wire to Oil Level Thermal Sensor (G266) on subframe.
-
Place used oil collection and extraction device ( V.A.G 1782) under transmission.
-
Remove right flange shaft bolt by installing 2 bolts in flange and counter holding flange shaft with assembly lever.
-
Remove flange shaft with spring, thrust washer and tapered ring.