TT Roadster L4-2.0L Turbo (BPY) (2008)
Installing
‹› Torque specification => [ Flange Shafts and Shaft Seals Assembly Overview ] See: Differential/Differential Output Shaft/Service and
Repair/Flange Shafts and Shaft Seals Assembly Overview.
Installation is in reverse order of removal, note the following:
-
Lightly oil outer circumference of new shaft seal.
-
Fill space between sealing and dust lips - arrow - halfway with sealing grease.
-
Drive in shaft seal as far as stop without tilting it.