TT Roadster L4-2.0L Turbo (BPY) (2008)
/Page-1108002.png)
-
Open clips - 1 and 2 - and remove air guide hose from Mass Air Flow (MAF) Sensor (G70).
-
Remove front air intake nozzle from lock carrier - 4 -.
-
Remove engine cover.
-
Place selector lever in position "P".
-
Remove securing plate - C -.
-
Press securing plate - A - upward and remove.
-
Press selector lever cable off of selector shaft lever - arrow - and remove from bracket - D -.
‹› Selector lever cable must not be bent or kinked.
‹› Ignore items - 1 and B -.
-
Remove Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC) (G130) => Fuel Injection and Ignition
24 Removal and Installation.
