TT Roadster L4-2.0L Turbo (BPY) (2008)
Pressing off inner constant velocity joint
-
Drive out CV joint boot with a drift.
-
Support ball hub when pressing off.
Pressing on inner constant velocity (CV) joint
-
Before installing CV joint or triple roller star, splines -A- must be lightly coated with grease used in joint.
-
Press on joint until stop.
-
Install circlip.
Note:
^
Chamfer on inner diameter of ball hub (splines) must face contact shoulder of drive axle.
Coat cover sealing surface with D 454 300 A2 and install