TT Roadster L4-2.0L Turbo (BPY) (2008)
Front Door Window Motor: Service and Repair
Window Regulator Motor
Removing
-
Door trim removed.
-
Bolt - 2 - 3.5 Nm
‹› Motor for window regulator can be removed or installed in every position of motor or side window.
‹› Before removing motor, disconnect electrical harness connectors.
-
Remove bolts - 2 - and remove nut - 1 - from threaded pins.
Installing
-
When installing, ensure threaded pins - 3 - engage with retainers in inner door panel.
-
Slide window regulator motor - 1 - onto threaded pin - 3 - and secure with screws - 2 -.
‹› Only switch ignition on after installing motor and connecting wires.
‹› Then move door window upward to stop and keep pressing switch for window regulator for approx. 2 seconds longer.
‹› This position is the base position and the high- and low-running function is activated.