TT Roadster L4-2.0L Turbo (BPY) (2008)
Back Window Glass: Service and Repair
Rear Window Assembly Overview
Rear Window Assembly Overview
1
Rear window
‹› Distance - a - to upper lid edge = 2 mm
‹› Even out distance - b - to side lid edge = 2.5 mm.
‹› Before removing, disconnect all electrical connectors and secure to inside center of window with adhesive tape.
‹› When installing, center window all around in window opening.
2
Adhesive sealing material
‹› Apply all around between adhesive stopper profiles
‹› Bead width = 8 mm ± 2 mm
‹› Bead height = 12 mm +2 mm
3
Connector
‹› Disconnect when removing window.
‹› Clipped into lid flange.