TT Roadster L4-2.0L Turbo (BPY) (2008)
Back Window Glass: Service and Repair
Undamaged Rear Window
Undamaged Rear Window
Removing
-
Remove rear lid trim.
-
Disconnect rear window defroster and window antenna connectors and secure to center of window with adhesive tape.
CAUTION!
When removing a window, always wear protective eyewear and leather gloves.
-
Pierce guide through adhesive bead using guide needle - 2 - with handle - 1 -.
-
Hold guide needle as close to glass as possible.
-
Remove handle and thread cutting cord through eye of needle.
-
Thread cutting cord through spooling tool - 1 - and clamp securely.
-
Route cutting cord around rear window under the window as shown in the illustration.
-
Loosen hex bolt - arrow - on rear lid hinge - 1 - and clamp end of cutting cord - 2 - securely with it.