TT Roadster L4-2.0L Turbo (BPY) (2008)
‹› Application direction - arrow - for adhesive bead - 1 -.
-
Apply adhesive sealing material all around near window molding.
-
With an undamaged removed window, apply adhesive to remaining bead.
‹› Use 1K Window Adhesive (DH 009 100 03) (small cartridge), or 2K Window Adhesive Kit (DA 004 600 A2) can also be used if more than one
window must be bonded.
-
Press in window with securing pin at C-pillar, then insert in window opening and secure with pop rivets in B-pillar area.
-
Observe minimum curing time => [ Minimum curing times ] See: Service and Repair.