TT Roadster L4-2.0L Turbo (BPY) (2008)
Quarter Window Glass: Service and Repair
Undamaged Side Window
Undamaged Side Window
Removing
CAUTION!
In window separation area, protect side panel and roof against paint damage with adhesive tape.
-
Remove door seal in side window area.
-
Drill out upper and lower rivet heads in B-pillar area on window and drive out rivet shafts.
-
Pry roof trim molding - 1 - out of retaining clips in side window area.
CAUTION!
Roof trim molding must not be bent.
-
Insert cutting cord around the side window as depicted in the illustration.
-
Secure X and Y ends in two pull grips from special tool Cutting Tools For Glass (V.A.G 1351).
-
Pull cutting cord forward in direction of - arrow A - using light sawing motions and cut through lower adhesive sealing material at side panel and
at roof frame.
-
In this way, first the securing pin on the rear of the window and then the adhesive bead are cut through.
-
Then pull cutting cord through in direction of - arrow B - downward through adhesive sealing material.
-
Remove window from window opening.