TT Roadster L4-2.0L Turbo (BPY) (2008)
Windshield Washer Spray Nozzle: Adjustments
Spray Nozzles, Adjusting
Special tools, testers and auxiliary items required
‹› Windshield Washer Aiming Tool (T10127) equipped with Replacement Tip (3125/5A)
Adjusting
‹› The settings indicate the values for a moving vehicle, i.e. the spray from the jets is slightly offset when the vehicle is stationary.
-
Mark the six points on windshield using a water soluble marker:
-
Aim the individual jets at the points using the Setting Tool (T10127).
-
If the spray field does not correspond to the specifications, clean dirty spray jet.
Cleaning the nozzle:
-
Remove nozzle, refer to=> [ Spray Nozzles ] See: Service and Repair.
-
Flush nozzle opposite to spray direction using clear water.
-
To remove remaining impurities, the nozzle must only be blown out opposite to spray direction using compressed air.
-
If the spray field still does not correspond to the specifications, replace the spray jet.