TT Roadster L4-2.0L Turbo (BWA) (2009)
/Page-1865001.png)
Convertible Top Hydraulic Hose: Service and Repair
Removing Hydraulic Line from Pump
Removing Hydraulic Line from Pump
CAUTION!
O-ring seals should always be replaced after removal.
1
Screw
‹› 6 Nm
2
Hydraulic line
‹› Raise hydraulic pump out of housing.
‹› To remove, remove securing bolt - 1 - and remove connector pieces with hydraulic line from pump block - 4 -.
‹› Before installing, slide new O-ring seals onto connecting pieces.
CAUTION!
When inserting, connecting pieces must lie flush before bolts are tightened.
‹› To install, slide connecting pieces completely into pump block and tighten securing bolts - 1 - to 6 Nm.
3
Oil reservoir
‹› With Min and Max markings.
