TT Roadster L4-2.0L Turbo (BWA) (2009)
-
Make sure the grommet - C - fits correctly inside the bulkhead.
-
Seal flange for coolant pipes to heater core - A - and for expansion valve (to evaporator) - B - at pass-through of grommet - C - with silicon
adhesive sealant if necessary (to prevent water from penetrating).
-
Connect coolant hoses properly to heater core. Observe markings:
A Supply hose from cylinder head
B Return to the coolant pump
-
Reinstall all components removed in reverse order, with the exception of cover for connections on heater core and driver's side storage
compartment.