TT Roadster L4-2.0L Turbo (BWA) (2009)
‹› Thickness of sealant bead: 2 to 3 mm.
CAUTION!
Risk of plugging oil pump strainer with excess sealant.
‹› Do not apply sealant bead thicker than indicated.
‹› The sealant bead may not be thicker than 3 mm, otherwise excess sealant could enter the oil pan and clog the oil intake tube.
-
Lightly coat lower sealing surface of sealing flange with sealant - shaded area -.
‹› The sealing flange must be installed within 5 minutes of being applied with sealant.
-
Carefully slide sealing flange onto reamed bolt at cylinder block.
‹› To install the sealing flange with installed seal, use guide sleeve (T10053/1).
-
Tighten sealing flange bolts in 3 stages as follows: