audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Checking Engine Oil Level|Page 1480 > < Checking Engine Oil Level|Page 1478
Page 1
background image

Engine Oil: Removal and Replacement

Engine Oil, Draining and Replacing Oil Filter

WARNING! Oil extraction not permitted with various engine types!

Note:

-

Perform oil change at operating temperature.

Special tools and workshop equipment required

-

Oil Extractor -VAG 1782-

-

Hazet Tension Band -2171-1-

-

Oil Filter Wrench -3417-

-

Oil Drain Adapter -T 40057-

Note:

-

Observe waste disposal regulations!

1.8 TFSI, 2.0 TFSI

-

Remove the noise insulation.  See: Body and Frame/Sound Proofing / Insulation/Service and Repair

-

Loosen oil filter with -2171-1- or -3417- and remove.

Note:

-

Observe waste disposal regulations!

-

Open oil drain plug or extract engine oil.

-

Clean oil filter sealing surface on engine.

-

Lubricate rubber seal lightly with oil.

-

Install new filter and tighten.

-

Install oil drain plug with new gasket.

-

Fill with engine oil.

Tightening Specifications

Oil filter ...................................................................................................................................................................................................................  22 Nm
Oil drain plug ..........................................................................................................................................................................................................  30 Nm

2.0L TFSI BPY

-

Remove the noise insulation.

Checking Engine Oil Level|Page 1480 > < Checking Engine Oil Level|Page 1478