TT Roadster L4-2.0L Turbo (BWA) (2009)
-
Disconnect crankcase ventilation pipe - 1 -.
-
Remove Ground (GND) cable - 2 - for oil pressure switch.
-
Remove bolts - arrows - and remove oil filter bracket.
Installing
Installation is in reverse order of removal, note the following:
‹› Tightening torques => [ Oil Filter Bracket Assembly Overview ] See: Oil Filter Bracket Assembly Overview
‹› Tightening torques => [ Engine-Side Coolant System Assembly Overview ] See: Cooling System/Service and Repair/Removal and
Replacement/Engine-Side Coolant System Assembly Overview
‹› Always replace gaskets and seals.
‹› Secure all hose connections using hose clamps appropriate for the model type.
-
Install oil baffle => [ (Item 13) Oil baffle ] See: Oil Filter Bracket Assembly Overview