TT Roadster L4-2.0L Turbo (BWA) (2009)
‹› 90 Nm plus an additional 90° (1/4 turn)
‹› Replace
‹› Do not oil
‹› Fastening Counter Support (3415) => [ Crankshaft toothed belt sprocket, removing and
installing ]
21
Toothed belt
‹› Before removing, mark direction of rotation using chalk or felt-tip marker
‹› Check for wear
‹› Removing => [ Toothed Belt ] See: Toothed Belt
‹› Installing (adjusting valve timing) => [ Toothed Belt ] See: Toothed Belt
22
Toothed belt cover, lower
23
Engine support
‹› Removing => Toothed belt, removing and installing => [ Toothed Belt ] See: Toothed Belt
‹› Installing => [ Installing engine supports ]
24
Bolt
‹› 45 Nm
‹› Observe tightening sequence => [ Insert lower bolt into
engine support. ] See: Toothed Belt
25
Cover for toothed belt guard
Loosening camshaft sprocket
-
When loosening and tightening center bolt, use retainer (3036).
Pulling off camshaft sprocket