TT Roadster L4-2.0L Turbo (BWA) (2009)
-
Removing remaining bolts from toothed belt guard - arrows - and remove toothed belt guard from engine.
-
Mark rotational direction of toothed belt.
-
Loosen tensioning roller and remove toothed belt.
-
Then, turn crankshaft back slightly.
Installing
‹› Tightening torques => [ Toothed Belt Drive Assembly Overview ] See: Toothed Belt Drive Assembly Overview
‹› When turning camshaft, crankshaft must not be at TDC. Valves and/or pistons may be damaged.