TT Roadster L4-2.0L Turbo (BWA) (2009)
/Page-201003.png)
-
Remove ribbed belt.
Installing
Installation is in reverse order of removal, note the following:
‹› Make sure, before installing ribbed belt, that all ancillaries (generator and A/C compressor) are secured tightly.
-
Place ribbed belt onto belt pulleys of crankshaft and A/C compressor.
-
Place ribbed belt onto generator belt pulley last, and release tensioner.
-
Check ribbed belt for correct positioning.
-
Start engine and check belt running.
