TT Roadster L4-2.0L Turbo (BWA) (2009)
‹› Installed position is fixed by woodruff key => [ (Item 7) Woodruff key ]
‹› Camshaft sprocket, removing => [ Pulling off camshaft sprocket ]
5
Bolt
‹› 10 Nm
‹› Insert with locking fluid
‹› Locking fluid
6
Rear toothed belt cover
7
Woodruff key
‹› Check for secure seat
8
Nut
‹› 25 Nm
9
Semi-automatic tensioning roller
10
Coolant pump
‹› Removing and installing => [ Coolant Pump ] See: Engine, Cooling and Exhaust/Cooling System/Water Pump/Service and Repair
11
O-ring
‹› Replace
12
Bolt
‹› 25 Nm
13
Damper roller
14
Bolt
‹› 15 Nm
15
Bolt
‹› 35 Nm
16
Damper roller
17
Sealing flange
‹› Removing and installing => [ Front Sealing Flange ] See: Engine, Cooling and Exhaust/Engine/Cylinder Block Assembly/Front Engine
Plate/Service and Repair/Front Sealing Flange
18
Toothed belt gear diamond disc
‹› Replace after removing toothed belt gear
19
Crankshaft toothed belt sprocket
‹› There must be no oil on contact surface between toothed belt sprocket and crankshaft
‹› Only possible to install in one position
20
Bolt