TT Roadster L4-2.0L Turbo (BWA) (2009)
/Page-28001.png)
Lamp Control Module: Service and Repair
Bi-Xenon Gas Discharge Headlamps with Cornering Light
HID Lamp Control Module
Removing
CAUTION!
Danger to life due to high voltage.
‹› Always disconnect the battery wire strap before working on gas-discharge headlamp components marked with yellow high-voltage
symbols.
-
Remove headlamp, See: Lighting and Horns/Headlamp/Service and Repair/Bi-Xenon Gas Discharge Headlamps with Cornering Light/Headlamp
-
Remove screws - arrows -.
-
Remove control module - 1 - from headlamp housing.
-
Disconnect gas-discharge lamp adapter lead - 2 - at control module - 1 -.
Installing
‹› Tightening specification, refer to => [ Bi-Xenon Headlamps with Cornering Light Assembly Overview ] .
Install in reverse order of removal, observing the following:
