TT Roadster L4-2.0L Turbo (BWA) (2009)
‹› Always replace after removal
8
Bolt
‹› 10 Nm
9
Brake Disc
10
Bolt
‹› Hex bolt = 200 Nm plus an additional 180° turn, refer to => [ Hex Bolt between Drive Axle and Wheel Hub, Loosening and Tightening ] See:
Wheel Hub/Axle Nut/Service and Repair/Front Suspension/Hex Bolt between Drive Axle and Wheel Hub, Loosening and Tightening.
‹› Twelve point bolt = 70 Nm plus an additional 90° turn, refer to => [ 12-Point Bolt between Drive Axle and Wheel Hub, Loosening and
Tightening ] See: Wheel Hub/Axle Nut/Service and Repair/Front Suspension/12-Point Bolt between Drive Axle and Wheel Hub, Loosening
and Tightening.
‹› Always replace after removal
‹› Before installing, clean the threads in the constant velocity joint with a tap.
11
Bolt
‹› 4 Nm
12
Wheel Hub with Wheel Bearing
‹› Removing and installing, refer to => [ Wheel Bearing Unit ] See: Wheel Bearing/Service and Repair/Removal and Replacement/Wheel
Bearing Unit
‹› Sensor ring for ABS is installed in wheel hub
‹› Various versions
13
Wheel Bearing Housing
‹› Removing and installing, refer to => [ Wheel Bearing Housing ] See: Wheel Bearing/Service and Repair/Removal and Replacement/Wheel
Bearing Housing
14
Bolt
‹› 70 Nm plus an additional 90° turn
‹› Always replace after removal
15
Drive Axle
16
Nut
‹› Always replace after removal