TT Roadster L4-2.0L Turbo (BWA) (2009)
-
Remove oil pan with oil pan seal and let gear oil remaining in oil pan drain into Used Oil Collecting and Extracting Device ( V.A.G 1782).
Installing
‹› Torque specification => [ Oil pan tightening sequence ] See: Oil Pan, Mechatronic, and Transmission Oil Pump Assembly Overview
Installation is in reverse order of removal, note the following:
‹› Replace oil pan seal and bolts.
‹› Replace O-rings - arrows - on Direct Shift Gearbox (DSG) Mechatronic (J743) connector.
-
Clean sealing surfaces; they must be free from oil or grease.
-
Position oil pan with oil pan seal and tighten => [ Oil pan tightening sequence ] See: Oil Pan, Mechatronic, and Transmission Oil Pump Assembly
Overview