TT Roadster L4-2.0L Turbo (BWA) (2009)
/Page-772003.png)
‹› Closed side of seal - arrow - faces toward outside.
-
Position selector shaft lever on selector shaft and tighten - arrow -.
‹› Lever of selector shaft installs onto splines only in one position.
-
Install selector lever cable => [ Selector Lever Cable ] See: Shift Linkage/Shift Cable/Service and Repair.
-
Adjust selector lever cable => [ Selector Lever Cable, Adjusting ] See: Shift Linkage/Shift Cable/Adjustments.
