TT Roadster L4-2.0L Turbo (BWA) (2009)
/Page-789001.png)
Shifter A/T: Service and Repair
Selector Lever Scale Illumination
Selector Lever Scale Illumination
Removing
Proceed as follows:
-
Engage parking brake.
-
Place selector lever in position "N".
-
Switch ignition off and remove ignition key.
-
Carefully pry selector lever boot out of boot trim using a small screwdriver - arrow 1 -.
-
Pull selector lever boot upwards at both sides - arrows 2 and 3 -.
-
Fold selector lever boot up.
-
Pry center console trim out of console using Trim Removal Wedge (3409) - arrows -.
