TT Roadster L4-2.0L Turbo (BWA) (2009)
/Page-790001.png)
Shifter A/T: Service and Repair
Selector Mechanism
Selector Mechanism
Removing
Proceed as follows:
-
Switch ignition off.
-
Remove selector lever handle => [ Selector Lever Handle ] See: Selector Lever Handle.
-
Remove center console cover panel => Body Interior
68 Removal and Installation.
-
Remove ashtray.
-
Disconnect electrical connection - A -.
‹› Ignore - 1, B, C -.
-
Disconnect electrical harness connector - 3 - from Mass Air Flow (MAF) Sensor (G70).
