TT Roadster L4-2.0L Turbo (BWA) (2009)
/Page-845006.png)
A Wooden support
-
Secure driveshaft against falling down with strap from Universal Transmission Support (V.A.G 1359/2).
-
Remove the bolts for the center bearing and the heat shield - arrows -.
-
Remove the heat shield.
-
Check whether there is a marking (colored dot) on driveshaft and rear final drive driveshaft flange - arrows -.
-
If not, identify position of flexible disc and flange/driveshaft to rear final drive - arrows -.
-
Remove the driveshaft bolts - arrows - on the rear final drive.
