TT Roadster L4-2.0L Turbo (BWA) (2009)
Drive/Propeller Shaft: Removal and Replacement
Driveshaft with Separable Center Support, through 05.2007 Assembly Overview
Driveshaft with Separable Center Support, through 05.2007 Assembly Overview
1 - Manual transmission with bevel gear transfer case
2 - Bolt
‹› 50 Nm plus an additional 90° turn
‹› Always replace
3 - Flexible disc with heat shield
‹› Installation position: Open side of heat shield faces toward transmission
‹› Removing and installing, refer to => [ Driveshaft with Separable Center Support, through 05.2007, Removing ] See: Driveshaft with Separable
Center Support, through 05.2007, Removing
4 - Bolt
‹› 60 Nm
‹› Allocation, refer to => [ Note location of various collar bolts ] See: Driveshaft with Separable Center Support, through 05.2007, Installing
5 - Centering bushing
6 - Front driveshaft tube