audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Climatronic Control Module J255 A/C Control Head|Page 79 > < Radiator Cooling Fan Control Module|Locations
Page 1
background image

Control Module HVAC: Description and Operation
Climatronic Control Module J255 A/C Control Head

Climatronic Control Module J255 A/C Control Head

-

Climatronic Control Module (J255) A/C control head, removing and installing. Refer to => [ A/C Control Head ] See: Service and Repair/A/C
Control Head. 

‹› On vehicles with heating (without A/C system), a Climatronic Control Module (J255) heater control head is installed instead of the A/C control

head. There is no Instrument Panel Interior Temperature Sensor (G56) and no Interior Temperature Sensor Fan (V42) installed in the Climatronic
Control Module (J255) heater control head.

‹› A/C control heads, the Climatronic Control Module ( J255), can currently be exchanged as usual, component protection is not active at this time

Vehicle Diagnosis, Testing and Information System VAS 5051 under "Guided Fault Finding.

‹› If an A/C (from the heater) Control Head Climatronic Control Unit (J255) with active component protection (anti-theft system) is installed in a

different vehicle, only the functions necessary for vehicle safety can be selected, comfort functions can no longer be selected; Vehicle Diagnosis,
Testing and Information System VAS 5051 under "Guided Fault Finding

‹› Component protection (anti-theft system, introduction not yet finalized) can only be cancelled by entering specific vehicle data Vehicle Diagnosis,

Testing and Information System VAS 5051 under "Guided Fault Finding

‹› When replacing a Climatronic Control Module (J255 ) A/C (heater) control head, observe exact allocation. Different versions, with or without seat

heating switch, with different temperature unit (°C or °F) on temperature setting rotary switch, rotary switches with black or silver surface.

‹› If a new Climatronic Control Module (J255) A/C (heater) control head was installed and basic setting was not performed, A/C system regulation is

limited and this is displayed in the DTC memory as a malfunction. After installing the Climatronic Control Module (J255) A/C (heater) control
head, perform a basic setting to the A/C (heater) according to Vehicle Diagnosis, Testing and Information System VAS 5051 under "Guided Fault
Finding".

‹› The Climatronic Control Module (J255) A/C (heater) control head buttons and rotary switches are lit with light diodes (LEDs, cannot be replaced).

‹› The function and indicator lights in the buttons and in the rotary switches cannot be replaced separately.

‹› If the Instrument Panel Interior Temperature Sensor (G56) measurement is incorrect, check Climatronic Control Module (J255) A/C control head

intake grille trim (it must not be closed) and function of the Interior Temperature Sensor Fan (V42) Vehicle Diagnosis, Testing and Information
System VAS 5051 under "Guided Fault Finding"

‹› The selected functions are displayed when the function lights in the various Climatronic Control Module (J255) A/C (heater) control head buttons,

rotary switches or display fields light up. 

‹› From May 2007, a A/C air distribution housing with a door in the air outlet to the defroster vents in the instrument panel without a side cut-out is

gradually being installed. With the introduction of the flap without the side cut-out, the Climatronic Control Module (J255) is also changed (due
the missing cut-out, the flap must be open wider to direct the same amount of air to the windshield). The Climatronic Control Module (J255), part
number "8J0 820 043" through index "AA" only may be installed only in vehicles which have a A/C air distribution housing with a door in the air
outlet to the defroster vents in the instrument panel without a side cut-out (exception: vehicles which will driven only in tropical regions)=> [ A/C
Air Distribution Housing Defroster Outlet Flap ] See: Heating and Air Conditioning/Air Door/Description and Operation/A/C Air Distribution
Housing Defroster Outlet Flap. With the A/C control head Climatronic Control Module (J255) part number "8J0 820 043" from index "AB" the
"adaptation" function, the version of the door in the air outlet to the defroster vents in the instrument panel) can be entered (Climatronic Control
Module (J255 ) adapting) and Vehicle Diagnosis, Testing and Information System VAS 5051 under "Guided Fault Finding".

‹› 5-cylinder vehicle may only have heater controls, part number 8J0 819 043 starting with index "D". Refer to Vehicle Diagnosis, Testing and

Information System VAS 5051 under "Guided Fault Finding".

‹› 5-cylinder vehicle may only have A/C controls, part number 8J0 820,043 starting with index "D". Refer to Vehicle Diagnosis, Testing and

Information System VAS 5051 under "Guided Fault Finding".

‹› A/C (heater) control head, removing and installing, refer to => [ A/C Control Head ] See: Service and Repair/A/C Control Head

Climatronic Control Module J255 A/C Control Head|Page 79 > < Radiator Cooling Fan Control Module|Locations