TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
Ultrasonic Sensor: Service and Repair
Antitheft Alarm System Sensor
Removing
-
If the control module is replaced, select "Replace" function for the respective control module in "Guided Functions" Vehicle diagnosis, testing and
information system VAS 5051.
-
Remove front interior/reading light. Refer to=> [ Front Interior Lamp/Reading Lamp ] See: Lighting and Horns/Courtesy Lamp/Service and
Repair/Front Interior Lamp/Reading Lamp.
-
Release retaining clips - arrow A - and tip Antitheft Alarm System Sensor (G578) - item 3 - out of interior light/reading light - arrow B -.
-
Using a small screwdriver - 1 -, carefully unclip individual interior monitoring sensors - 2 - from interior light/reading light.
Installing
Install in reverse order of removal, observing the following:
-
Connect electrical connector.
-
Install front interior/reading light, refer to => [ Front Interior Lamp/Reading Lamp ] See: Lighting and Horns/Courtesy Lamp/Service and
Repair/Front Interior Lamp/Reading Lamp.