TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
-
Disengage upper door trim from door in window shaft area by pulling door trim up.
-
Disengage bracket - 3 - on mounting bracket - 2 -.
-
Pull inside door release cable in - direction of arrow - out of bracket.
-
Disengage end of cable - 1 - at door release mechanism.
-
Disconnect electrical connector - 2 - on door control module - 1 -.
-
To disconnect electrical connector, press catch - 1 -, rotate retaining bracket in - direction of arrow - and remove connector.