TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
Power Seat Motor: Service and Repair
Seat Forward/Back Adjustment Motor
Seat Forward/Back Adjustment Motor
‹› If motor is faulty, lower seat pan frame must be replaced.
‹› Seat is shown without upholstery and without backrest in picture for the sake of a better illustration.
Removing
CAUTION!
‹› Observe safety precautions for work on airbags. Refer to => [ Airbag Safety Precautions ] See: Restraint Systems/Air Bag
Systems/Air Bag/Service Precautions.
‹› Before handling airbag units (e.g. disconnecting electrical connector), the person handling it must "discharge static electricity". This
can be done by touching door striker, for example.
-
Remove the seat. See: Service and Repair/Removal and Replacement/Front Power Seats/Front Seat
-
Attach front seat to Fixture For Seat Repair ( VAS 6136). Refer to => [ Front Seat, Installing on Fixture for Seat Repair VAS 6136 ] See: Service
and Repair/Removal and Replacement/Seat Versions Overview.
-
Separate seat pan upper frame from lower frame. Refer to => [ Seat Pan, Disassembling and Assembling ] See: Service and Repair/Removal and
Replacement/Front Power Seats.
‹› The inclination adjustment motor and height adjustment motor must be installed in the new seat pan lower frame.
-
Remove Driver Seat Inclination Adjustment Motor (V243) or (V244) - 1 -. See: Service and Repair/Removal and Replacement/Front Power
Seats/Front Seat Angle Adjustment Motors
-
Remove Driver Seat Height Adjustment Motor (V245) or (V246)- 3 -. See: Service and Repair/Removal and Replacement/Front Power Seats/Seat
Height Adjustment Motors
2
Driver seat angle adjustment motor (V243) or front passenger seat angle adjustment motor (V244)
4
Seat pan lower frame