TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
/Page-2104001.png)
Hood Weatherstrip: Service and Repair
Hood Seal
1
Lock carrier seal
‹› Slide onto center of lock carrier from behind.
2
Right sealing profile
‹› Self-adhesive.
‹› Remove protective paper and press onto fender flange.
3
Seal for plenum chamber
‹› Slide into sealing profile with pre-tension, beginning at sides.
‹› Press seal onto opposite side in stages.
‹› Install seal with tension in the curved areas.
CAUTION!
Buckling in the rounded areas is not permitted.
‹› Slide seal into sealing profile on opposite side.
4
Plenum chamber cover
‹› Must be slid under lip of plenum chamber seal.
