TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
When removing, make sure that surface of cylinder is not damaged.
Installing
-
The surface of the piston and seal must only be cleaned with mineral spirits and then dried.
-
Thinly coat piston and seal with lithium grease ( G 052 150 A2) before inserting.
-
Install sealing ring in brake caliper.
-
Insert protective cap - A - into disk (T10146/6) - 1 -.
-
Press protective cap with assembly tool - 1 - and piston resetting tool - 2 - into brake caliper so that it contacts brake caliper all around.