TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
/Page-378001.png)
Camshaft Bearing: Specifications
Camshaft Bearing Cap Guide Frame Bolts
-
Replace guide frame bolts
-
Tighten bolts in 3 stages in - 1 to 6 - sequence as follows:
-
Install bolts by hand as far as stop
‹› The guide frame must be in contact with the entire contact surface of the cylinder head
-
Tighten to 8 Nm
-
Tighten an additional 90°
