TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
Oil Filter Housing: Removal and Replacement
Oil Filter Bracket
Oil Filter Bracket
Removing
-
Remove oil cooler. Refer to => [ Oil Cooler ] See: Oil Cooler/Service and Repair/Oil Cooler.
-
Drain oil filter housing. Refer to => [ Oil Filter Housing, Draining ] See: Procedures.
-
Press release buttons and remove crankcase ventilation pipe - 1 -.
-
Remove bolts - arrows - and oil filter bracket.
‹› Ignore - 2 -.
Installing
‹› For tightening specifications, refer to => [ Oil Filter Bracket and Oil Cooler Assembly Overview ] See: Oil Filter Bracket and Oil Cooler
Assembly Overview.
Installation is in reverse order of removal, noting the following:
‹› Replace seals and sealing rings.
‹› Secure all hose connections using hose clamps appropriate for the model type.
-
Install oil baffle. Refer to => [ Oil Baffle Installation Location ] See: Oil Filter Bracket and Oil Cooler Assembly Overview
-
Install oil cooler. Refer to => [ Oil Cooler ] See: Oil Cooler/Service and Repair/Oil Cooler.