TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
/Page-464005.png)
-
Position balance shaft module with the oil pump and intermediate plate.
-
Insert bolts - arrows - that are the correct length => [ Balance Shaft Housing Bolts ] See: Balance Shaft Module With Oil Pump Assembly
Overview and tighten => [ Balance Shaft Housing Tightening Specifications
and Sequence ] See: Balance Shaft Module With Oil Pump Assembly Overview
-
Insert oil baffle pins - arrows - in the balance shaft module to install.
-
Make sure the camshaft and crankshaft are at TDC.
