audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Blower Motor > < Air Register|Service and Repair
Page 1
background image

Ambient Temperature Sensor / Switch HVAC: Service and Repair

Outside Air Temperature Sensor

Removing

-

Remove front bumper cover.

-

Disconnect electrical connector - 1 -.

-

Carefully press retaining clips together - arrow - and remove Outside Air Temperature Sensor (G17) upward from bracket.

Installing

Install in reverse order of removal, observing the following:

-

Install front bumper cover.

Blower Motor > < Air Register|Service and Repair