TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
-
Release electrical connector - arrow - on the oil pressure switch with assembly tool (T10118) and remove.
-
Remove oil pressure switch with hinged socket wrench (T40175).
Installing
‹› For tightening specifications, refer to => [ Oil Filter Bracket and Oil Cooler Assembly Overview ] See: Engine, Cooling and
Exhaust/Engine/Engine Lubrication/Oil Filter Housing/Service and Repair/Removal and Replacement/Oil Filter Bracket and Oil Cooler Assembly
Overview.
Installation is in reverse order of removal, noting the following:
‹› The hose supports, air guide pipes and hoses must be free of oil and grease before installing.
-
Install air filter housing and the air filter.