TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
Fluid - A/T: Service and Repair
Gear Oil, Draining, or Filling after Repairs
Gear Oil, Draining, or Filling after Repairs
Special tools, testers and auxiliary items required
‹› Oil Collection and Extraction Device (VAG 1782)
‹› Adapter for Oil Filling (VAS 6262)
‹› Protective Eyewear
‹› Acid-Resistant Protective Gloves
Procedure
‹› Observe general repair notes. Refer to => [ Repair Information ] See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Service and
Repair/Procedures/02EA Transmission/Repair Information.
‹› Observe cleanliness rules when working on transmissions. Refer to => [ Clean Working Conditions ] See: Transmission and Drivetrain/Automatic
Transmission/Transaxle/Service Precautions/02EA Transmission/Clean Working Conditions.
‹› Follow oil disposal regulations. Refer to => [ DSG Transmission 02E ] See: Transmission and Drivetrain/Automatic
Transmission/Transaxle/Description and Operation/DSG Transmission 02E.
‹› Only the gear oil for direct shift automatic transmission 02E that is available as a replacement part may be used. Other oils can cause malfunctions
or transmission failure.
CAUTION!
Risk of injury due to hot gear oil.
‹› Use protective eyewear.
‹› Use acid-resistant protective gloves.
CAUTION!
Risk of transmission damage.
‹› Engine must NOT be started if there is no gear oil in the transmission.
‹› Transmission not in emergency operation mode.
‹› Move vehicle onto a 4-column lifting platform or over a work pit so that it stands absolutely horizontal.
‹› Place selector lever in position "P", engage parking brake.