TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
-
Screw oil container - A - onto Charging Device F/haldex 2 Coup. (VAS 6291)
-
Now open valve - arrow - and hold oil container as shown in illustration.
Haldex clutch is now filled.
‹› When Haldex clutch is filled properly, oil escapes at adapter - A -.
-
Raise vehicle.
-
If oil is escaping, place oil container below Haldex clutch (for example on a workshop cart).
Overflowing oil now runs back into oil container.
-
If no more oil runs back, remove Charging Device F/haldex 2 Coup. (VAS 6291).
‹› The Haldex clutch is not filled up to the lower edge of the oil filler hole.
-
Install bolt - arrow - with new seal and tighten.