audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Engine Coolant Temperature Sensor on Radiator, Checking|Page 598 > < Engine Coolant Temperature Sensor on Radiator, Checking|Page 596
Page 3
background image

If any of the specified values was not obtained:

-

Replace the Engine Coolant Temperature (ECT) Sensor (on Radiator) (G83). 

If any of the specified values was obtained:

Checking wiring

If the manufacturers test box is being used, perform the following step.

-

Install the test box.

If the manufacturers test box is not being used, perform the following step.

-

Remove the Motronic Engine Control Module (ECM) (J623). 

-

Using a Multimeter, check the Engine Coolant Temperature (ECT) Sensor (on Radiator) (G83) electrical harness connector terminals to the
Motronic Engine Control Module (ECM) (J623) electrical harness connector T94 terminals for an open circuit according to the wiring diagram.

Engine Coolant Temperature Sensor on Radiator, Checking|Page 598 > < Engine Coolant Temperature Sensor on Radiator, Checking|Page 596