TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
Seat Occupant Sensor: Service and Repair
Description and Operation
Passenger Occupant Detection System, PODS, Servicing
=> [ Passenger Occupant Detection System Assembly Overview ]
Passenger Occupant Detection System Assembly Overview
CAUTION!
‹› Follow the additional safety precautions for working on the passenger airbag deactivation seat occupied recognition system. Refer to
=> [ PODS for Front Passenger Airbag Deactivation Additional Safety Precautions ] See: Restraint Systems/Air Bag Systems/Air
Bag/Service Precautions.
‹› Follow the procedure for the passenger airbag deactivation seat occupied recognition system after a crash. Refer to => [ PODS for
Front Passenger Airbag Deactivation, Steps to be Performed after a Crash ] See: Restraint Systems/Air Bag Systems/Air Bag/Service
Precautions.
‹› The replacement part (service kit) for the seat occupied recognition system (for specific countries) is already precalibrated and must
not be separated under any circumstances. Refer to => [ Passenger Occupant Detection System ] See: .
CAUTION!
The replacement part (service kit) for the seat occupied recognition system is already precalibrated and must not be separated under any
circumstances. The service kit consists of:
‹› Seat Occupied Recognition Control Module (J706)
‹› Seat Occupied Recognition Pressure Sensor (G452)
‹› Passenger Occupant Detection System Mat
‹› Seat cushion
‹› Wiring harness between Seat Occupied Recognition Control Module (J706) and Seat Occupied Recognition Pressure Sensor (G452).