TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
Removing
-
Disconnect the connector.
-
Remove nut - 5 -.
-
Remove bolt - 2 -.
-
Remove level control system sensor - 3 -.
Installing
Installation is in reverse order of removal. Observe the following when doing so:
The hooks on the coupling rod must be guided onto the transverse link.
Sensor lever must point outward.
Tightening specifications, refer to => [ Subframe, Stabilizer Bar, Transverse Link, Ball Joint, Level Control System Sensor Assembly Overview ] See:
Body and Frame/Frame/Subframe/Front Subframe/Service and Repair/Subframe, Stabilizer Bar, Transverse Link, Ball Joint, Level Control System
Sensor Assembly Overview
-
On vehicles with electronically-controlled damping (Audi magnetic ride), reprogram control position.
-
Perform headlamp basic setting. See: Lighting and Horns/Headlamp/Adjustments