TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
/Page-1373004.png)
To do so, press connector terminal out of spiral spring housing in direction of - arrow - using a screwdriver (3 mm blade width) as depicted in the
illustration.
-
Pull locking mechanism in direction of - arrow - out of steering gear housing.
-
Carefully pull sensor wire out of steering gear housing.
-
Disconnect harness connector of sensor wire at power steering control module (J500).
-
To do so, press button - A - in direction of - arrow - and then disconnect connector.
