TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
Shifter A/T: Procedures
Selector Lever Handle Locking Button, Bringing into Installation Position
Special tools, testers and auxiliary items required
‹› Release Tool (T40203)
Selector Lever Handle with Front Lock Button
‹› The locking button - 1 - projects out in its installation position in the handle.
If the locking button was pressed in, then it must be brought back to it installation position so that the handle can be installed.
-
Carefully install the release tool (T40203) all the way into the handle - 1 -.