TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
Installing
-
Before installing, lightly coat new seal on outside circumference and between sealing lips with Haldex Clutch High Performance Oil.
-
Drive in new seal to stop using Thrust Piece ( T10019). Do not cant sealing ring when doing this.
-
Drive off flange/driveshaft with Sleeve (30 - 20).
-
Insert new hex nut with Locking Compound (D 000 600 ) and tighten. Tightening specification => [ (Item 14) Nut ] See: Differential Lock/Service
and Repair/Rear Final Drive 02D and 0AV, Haldex Clutch Assembly Overview