TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
/Page-911002.png)
-
Screw a nut M8 - arrow - on Puller (T10037) threads until it is flush with beginning of threads.
-
Remove flange shaft with Puller (T10037 ).
Procedure for both sides
-
Pry off flange shaft seal with Extractor Lever ( VW 681).
Installing
-
Lightly lubricate outer diameter of new seal and drive on up to stop with Thrust Piece (T10049) without tilting seal.
