V8 Quattro V8-3562cc 3.6L DOHC (PT) (1990)
^
write down eight-digit electronic serial number (ESN) of new transceiver
^
ESN starts with 82______ or C3______
^
printed on bar-code label on rear of transceiver
^
obtain necessary customer provided information (phone number, unlock code, security code, etc.)
^
call Cellular Telephone Company and inform representative of transceiver replacement
^
representative will ask for ESN and provide instructions and programming information
^
write down necessary telephone programming information
^
program telephone using information provided by both customer and Cellular Telephone Company, refer to booklet Cellular Telephone
Programming Instructions.
If the phone won't go into programming,
^
check programming sequence and review instructions for proper programming
^
check speed of data entry - enter information without long pauses
^
phone is locked up (after three changes of telephone number) - reset lockout counter via 32 # command in Test Mode (using test connector US
30844), section 91-130
^
phone has been previously programmed and security code is unknown/forgotten - use 55 # command in Test Mode to review prior security code
(using test connector US 30844), section 91-150