V8 Quattro V8-3562cc 3.6L DOHC (PT) (1990)
/Page-834003.png)
^
install eyelet end of new wiring harness onto D+ terminal and secure with self locking nut from kit
^
route alternator wires, as shown
^
route new wiring harness through grommet A, as shown
^
tuck remainder of harness under grommet B
^
connect female connector of new wiring harness to .3 bar (4.4 psi) oil pressure switch
^
connect white male connector to new white female connector
^
tie wrap, as shown, leaving some slack in wire to alternator
^
reinstall all components in reverse order of removal
^
reconnect battery ground strap
