V8 Quattro V8-3562cc 3.6L DOHC (PT) (1990)
^
install replacement connector from kit
^
rubber plug MUST be installed onto wire before connector is installed
^
attach new connector housing and connector end lock
^
attach new connector to matching connector of new wiring harness
^
remove sound dampening pan (arrows)
^
disconnect and remove cooling air duct from alternator (arrow)
^
disconnect and remove outer half of air intake elbow from alternator (top arrow)
^
this provides access to D+ terminal
^
remove nut from D+ terminal and discard
^
leave blue wire attached